[AMPS] Coil Forms

To:	<amps@contesting.com>
Subject:	[AMPS] Coil Forms
From:	Peter.Chadwick@zarlink.com (Peter Chadwick)
Date:	Mon, 12 Nov 2001 13:16:23 -0000

I've come across some black PVC tube that was conductive, so using that wouldn't
be a good idea.....

73

Peter G3RZP




--
FAQ on WWW:               http://www.contesting.com/FAQ/amps
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com

<Prev in Thread]	Current Thread	[Next in Thread>
[AMPS] Coil Forms, Peter Chadwick [AMPS] Coil Forms, Tom Rauch [AMPS] Coil Forms, Steve Thompson [AMPS] Coil Forms, Peter Chadwick <= [AMPS] Coil Forms, 2 [AMPS] Coil Forms, Peter Chadwick [AMPS] Coil Forms, Jim Bryant [AMPS] Coil Forms, Lamb [AMPS] Coil Forms, Tom Rauch [AMPS] Question - Using 3 phase Xfmr on single phase power?, Jerry Flanders [AMPS] Question - Using 3 phase Xfmr on single phase power?, Bob Alexander [AMPS] Question - Using 3 phase Xfmr on single phase power?, Jerry Flanders [AMPS] Question - Using 3 phase Xfmr on single phasepower? RESOLVED, Jerry Flanders [AMPS] Reverse-engineering design plate HV, Jerry Flanders

Previous by Date:	[AMPS] Coil Forms, Tom Rauch
Next by Date:	[AMPS] Cheap Source of Copper Ribbon, Bill Smith
Previous by Thread:	[AMPS] Coil Forms, Steve Thompson
Next by Thread:	[AMPS] Coil Forms, 2
Indexes:	[Date] [Thread] [Top] [All Lists]