>
>Hello Jack
>
>The grounded screen work ok for the 4CX800.
>This configuration was used for sure by some hams
>in Ukraine with very good results.
>Using other sockets than the originals was
>experimented also with good results.
>Use more different value capacitors, not only one type/value,
>and is preferable to use some sort of contacts/fingerstock for
>the external screen connector, rather than the single screen soccket pin.
>
Good advice, Traian. The grounded-screen also works ok for 'tetrodes
with handles', like the 8170, 8171 and 8281. I have never heard of a
screen-bypass C for them, so grounded-screen is the only game in town.
-cheers
- R. L. Measures, 805.386.3734,AG6K, www.vcnet.com/measures.
end
--
FAQ on WWW: http://www.contesting.com/FAQ/amps
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
|