FWIW - I generally make my own Teflon-jacketed wiring....
First start with ordering Teflon tubing and bare buss-bar wire. Alpha Wire
and Belden sells Teflon tubing and bare buss-bar wire in rolls of
50/100/500/1000 spools.
Start by winding the Teflon alone through the toroid core. Remove the
Teflon, measure and cut. Then, insert the bare buss-bar into the Teflon and
cut to the Teflon's same length.
It's important to order the Teflon tubing one or two guages larger than the
wire size. This makes slipping the buss-bar into the Teflon much easier.
-Paul, W9AC
----- Original Message -----
From: "Richard" <2@mail.vcnet.com>
To: "Terry Gaiser" <w6ru@bak.rr.com>; " AMPS" <amps@contesting.com>
Sent: Sunday, March 03, 2002 23:46 PM
Subject: Re: [Amps] Winding Toroid Help
>I need to wind a new output toroid for repairing an Alpha 374 amplifier. I
>have a source for the cores but who supplies teflon insulated # 12 solid
>wire ?
>
? Stranded #12 Teflon® does well if one fastens it with plastic cable
ties.
cheers, Terry
- R. L. Measures, a.k.a. Rich..., 805.386.3734,AG6K,
www.vcnet.com/measures.
end
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|