Amps
[Top] [All Lists]

[Amps] QRO

To: <amps@contesting.com>
Subject: [Amps] QRO
From: hondo@kscable.com (Steve M)
Date: Fri, 22 Mar 2002 19:11:04 -0600
One other thing about the QRO amp that I forgot to mention is that they
aren't overloaded with multiple fault trip outs. It had enough to protect
itself and that ought to do.
           A ham friend worked several months for a high end amp maker. He
said his only job was repairing the complex protection circuits in one model
they sold at the time.

Steve

----- Original Message -----
From: "Steve M" <hondo@kscable.com>
To: <amps@contesting.com>
Sent: Friday, March 22, 2002 6:36 PM
Subject: Fw: [Amps] QRO


>
> ----- Original Message -----
> From: "Steve M" <hondo@kscable.com>
> To: "QRO Technologies, Inc." <sales@qrotec.com>
> Sent: Friday, March 22, 2002 6:34 PM
> Subject: Re: [Amps] QRO
>
>
> > Ray,
> >
> > I bought it 97 if I remember. It was 1 number [serial number] higher or
> > lower than  the qst test unit. Yes I got a manual but no schematics or
> parts
> > list. I had to send it back to you for repair right after I got it. It
> > worked great from then until I sold it.
> >
> > 73
> > Steve  wd0ct
> >
> > ----- Original Message -----
> > From: "QRO Technologies, Inc." <sales@qrotec.com>
> > To: "Steve M" <hondo@kscable.com>
> > Sent: Friday, March 22, 2002 6:24 PM
> > Subject: Re: [Amps] QRO
> >
> >
> > > If you bought the HF-2500DX from me, you got a manual and full
> schematics
> > > with PCB layouts. Otherwise, you have brand X. When did you buy the
amp
> > from
> > > me?
> > >
> > > 73s Ray Connin KB8VU
> > >
> > > ----- Original Message -----
> > > From: "Steve M" <hondo@kscable.com>
> > > To: <amps@contesting.com>; "Richard" <2@mail.vcnet.com>
> > > Sent: Friday, March 22, 2002 7:11 PM
> > > Subject: Re: [Amps] QRO
> > >
> > >
> > > > What circuit diagram?  --my 2500 came with no schematic, diagrams,
or
> > > parts
> > > > list. Hopefully they are doing better now. In spite of this I still
> > > enjoyed
> > > > the amp while I had it--except when trying to move it..
> > > >
> > > > 73
> > > > Steve  wd0ct
> > > >
> > > > ----- Original Message -----
> > > > From: "Richard" <2@mail.vcnet.com>
> > > > To: "Tom Hix" <w4th@hotmail.com>; " AMPS" <amps@contesting.com>
> > > > Sent: Friday, March 22, 2002 5:07 PM
> > > > Subject: Re: [Amps] QRO
> > > >
> > > >
> > > > >
> > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >QRO builds a GREAT AMP.....especially the HF-2500.
> > > > > >
> > > > > ?  Does the circuit diagram match the circuit in the amplifier ?
> > > > >
> > > > > -  R. L. Measures, a.k.a. Rich..., 805.386.3734,AG6K,
> > > > > www.vcnet.com/measures.
> > > > > end
> > > > >
> > > > > _______________________________________________
> > > > > Amps mailing list
> > > > > Amps@contesting.com
> > > > > http://lists.contesting.com/mailman/listinfo/amps
> > > > >
> > > >
> > > >
> > > > _______________________________________________
> > > > Amps mailing list
> > > > Amps@contesting.com
> > > > http://lists.contesting.com/mailman/listinfo/amps
> > > >
> > >
> > >
> >
>
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps



<Prev in Thread] Current Thread [Next in Thread>