Amps
[Top] [All Lists]

Fw: RE: [Amps] Dentron GLA 1000 and Amp Supply Amplifier follow up comme

To: <amps@contesting.com>
Subject: Fw: RE: [Amps] Dentron GLA 1000 and Amp Supply Amplifier follow up comments.
From: nospam4me@juno.com (skipp isaham)
Date: Sun, 31 Mar 2002 10:12:55 -0800
Hi Joe,
- 
The rope holding the boat to the dock is the power 
supply size.  The Dentron Power transformer will 
only do so much. 
- 
cheers
skipp
- 
> Subject: [Amps] Dentron GLA 1000 and Amp Supply Amplifier follow up
> comments.
> Just depends on your point of view, budget and how 
> handy you are.  As a project amplifier, they are cheap 
> enough for a first repair/rebuilt/starter amplifier. I've 
> seen the Svetlana tubes and have a picture from an 
> Italian Amateur (Bernie) with a pair of 4cx250's in the 
> same space/cab. 
-
If someone produced a new PC board for it, a conversion to single 
4CX400 would be interesting for the GLA-1000.  The only real issue 
would be getting the proper high voltage.  The 4CX400 is easier to 
cool than 2 x 4CX250 and should be able to provide 500 to 600 watts.
-
> With 40 watts drive, an improved Dentron or similar 
> Amplifier could provide 10dB or more, stage gain. 
> Nothing wrong with an extra 10dB...   You can't buy 
> the parts to use as a starter amplifier project for what 
> you can pick up a dead Dentron for... 
-
With a 4:1 (or 9:1) step up auto-transformer ("balun") and the 
appropriate grid "swamping" resistor, a modified Dentron or similar 
amplifier could provide 20 dB of gain for use with the Yaesu FT-817,  
Elcraft or other QRP rig.  
73, 
   ... Joe, K4IK 


________________________________________________________________
GET INTERNET ACCESS FROM JUNO!
Juno offers FREE or PREMIUM Internet access for less!
Join Juno today!  For your FREE software, visit:
http://dl.www.juno.com/get/web/.

<Prev in Thread] Current Thread [Next in Thread>