>"Conrad G0RUZ" <g0ruz@btinternet.com> wrote:
>>
>>There is exhaustive documentation about the improvement over zener
>>stabilisation in 250B's and similar tubes on G3SEK's website, most of the
>>research was done by GW4FRX and I'd say (having been Ýsubjected to both
>>flavours on the air with a high IMD sensitive VHF/UHF Rx) the improvements
>>for your neighbours are very worthwhile.
>>
>'Scuse me, but what is a "high IMD sensitive VHF/UHF Rx"? I could see an
>Rx sensitive to high signal strength, but if somebody is transmitting at
>144.200 and has output products at 144.210 isn't any Rx going to hear it?
>
good question, Frank
cheerz
- R. L. Measures, a.k.a. Rich..., 805.386.3734,AG6K,
www.vcnet.com/measures.
end
|