NOVA Mechanics... Quins, NY
Alex
> -----Original Message-----
> From: wlfuqu00@uky.edu [mailto:Wlfuqu00@uky.edu]
> Sent: Wednesday, July 17, 2002 11:53 AM
> To: alex; AMPS
> Subject: Re: [Amps] Thermal Management in SS Amps.
>
>
> Show me a machine shop that can machine copper to 100 Angstroms.
>
> 73
> Bill
>
> At 11:10 AM 7/17/02 -0400, alex wrote:
> >One VERY important factor! The contact surface between the
> transistors and
> >the spreader and between the spreader and the
> >aluminum heat sink must be machined to a precision of better of
> >100Angstroms.
>
|