> >Those also have a TCBV, and it's just the opposite of zeners. Around
> 5.6V,
> >the TCZ or TCBV is usually zero, so this is a very good voltage to use,
> when
> >possible. It's about as stable as a zener gets.
>
> Would the case temp of said zener be nmt 25ºC at 4.48W diss. in July?
[Steve Katz] Hi Rich. Case temp of a DO-5 stud, which I usually
use, is about the same as the temperature of whatever it's mounted to...for
an axial leaded package, I'd think it would be higher!
-WB2WIK/6
> Cheers, Steve
>
>
> - R. L. Measures, a.k.a. Rich..., 805.386.3734,AG6K,
> www.vcnet.com/measures.
> end
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
|