[Amps] KNOB ORIENTATION

To:	<amps@contesting.com>
Subject:	[Amps] KNOB ORIENTATION
From:	W0YR at aol.com (W0YR@aol.com)
Date:	Mon Feb 24 18:19:53 2003

Can someone please clarify:

Should the pointer on knob of an antenna loading capacitor shaft point to 100 
when the plates are fully meshed, or should it point to zero?

<Prev in Thread]	Current Thread	[Next in Thread>
[Amps] KNOB ORIENTATION, W0YR@aol.com <= [Amps] KNOB ORIENTATION, Guillermo [Amps] KNOB ORIENTATION, Phil Clements [Amps] KNOB ORIENTATION, Steve Katz [Amps] KNOB ORIENTATION, wb8jkr@juno.com [Amps] KNOB ORIENTATION, W0YR@aol.com [Amps] KNOB ORIENTATION, Vic Rosenthal [Amps] KNOB ORIENTATION, carl seyersdahl [Amps] KNOB ORIENTATION, carl seyersdahl [Amps] KNOB ORIENTATION, Steve Katz [Amps] KNOB ORIENTATION, Steve Katz

Previous by Date:	[Amps] Re: Grain of Wheat bulbs, WA2BPE
Next by Date:	[Amps] KNOB ORIENTATION, Steve Katz
Previous by Thread:	[Amps] A real find...., Bill Fuqua
Next by Thread:	[Amps] KNOB ORIENTATION, Guillermo
Indexes:	[Date] [Thread] [Top] [All Lists]