>At 12:16 AM 3/9/03 -0500, ad5gb wrote:
>>I'm curious to know if there are others on this reflector who've
>>experienced similar problems (any brand amplifier) that have been
>>successfully solved with the AG6K ( or another design ) VHF supressor. To
>>round out the study, one would also need to know if someone had installed
>>such a thing and found that it *did not* solve the problem it was intended
>>to correct, or if it caused other problems.
>
>
>I replaced the Measures suppressors in an SB-220 with two conventional
>suppressors I bought from KM1H, and power output on 10M increased about 100
>watts.
Does it seem possible that two of Measures' low-Q suppressors can
dissipate about 100w?
>...
- R. L. Measures, a.k.a. Rich..., 805.386.3734, AG6K,
www.vcnet.com/measures.
end
|