In a message dated 10/3/03 12:09:14 AM Central Daylight Time, craxd1@ezwv.com
writes:
> Hello all,
> The Burle 4662 and the 8122 is a totally different beast. Even though they
> are wired internally the same
> and in the same envelope, the plate and grid voltages are completely
> different along with the plate
> dissapation and various other ratings. Below is the links to the PDF files
> at Burles website for you to
> download, I hope this will help and is some benefit to all of you.
>
> 8122: http://www.burle.com/cgi-bin/byteserver.pl/pdf/8122.pdf
>
> 4662: http://www.burle.com/cgi-bin/byteserver.pl/pdf/4662.pdf
>
> Typical Operation;
>
> Type Number - Power Carrier Watts - Anode Volts - Anode Amps1 - G2 Volts -
> Gain dB
>
> 8122 75 2000 0.15 200
> 17
>
> 4662 300 2500 0.30 250
> 16
>
> Wish I could help more but thats the nature of these beasts.
>
> Best & 73's
>
> Will Matney
> US Amplifier
>
Will,
Thank you.
From the specs shown on your email, it sounds like the 4662 may be a higher
power version of the 8122. That could be a big advantage to those folks who
know how to meet those parametrics in their existing amplifier.
Thanks again,
Dennis O.
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|