"R.Measures" <r@somis.org>wrote:
>? -- Bil -- The higher-freq. bands use Cu-tubing conductors. My
>guess at the 10m conductor is c. 3/8" tubing. Also worth noting is
>that the TL-922 pulls cooling air through the tank inductors and the
>output bandswitch.
the coil for the high bands is airwound with 5,8mm tubing, the
low bands are 1,8mm wire wound on a ceramic form with
openings for cooling air
73
Peter
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|