[Amps] SB-220 Meter Switch

[Will Matney <craxd1@ezwv.com>]

Pete,

I took a look at the SB-220 schematic and the meter switch is a 3 pole 
single throw rotary. A standard stock switch should work providing it 
has the correct shaft, mounting hole dia., and indexing. If the indexing 
was off, it would still be usable. Allied has several switch 
manufacturers. I think you may be able to find what you want there or at 
Mouser. Double check the indexing of that switch as they may have it.

Allied #       C&K #              Terminals  Poles   Positions   Cost

676-4260   A40315RNZQ   Solder       4P          3          5.64

676-4264   A40315RNCQ    PC          4P          3          5.64

http://www.ittcannon.com/media/pdf/catalogs/Leaf/SW_rotary_a.pdf

Will Matney

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps