Maybe when the FCC allows higher conductive signals for BPL they can
eliminate the annoying 60Hz power line current and we can power everything
in our homes by rectifying the RF.
73
Bill wa4lav
At 02:24 PM 11/15/2004 -0500, John Lawson wrote:
Usually I try to snip replies - but all this is relevant:
On Mon, 15 Nov 2004 Dennis12Amplify@aol.com wrote:
In a message dated 11/13/04 9:40:48 AM Central Standard Time,
dezrat1242@ispwest.com writes:
Which makes me wonder if it wouldn't be good to have our AC power
lines run at about 1000 Hz or so. No more shocks, no more accidental
electrocutions. The worst that could happen would be a burn.
Something to think about, eh?
I know the arguments against it - transmission loss being the most
significant - but someday when houses have their own little nuclear
generators and are "off the grid" it might be something to consider.
----------------------------------------------------------------------------
Actually, the power transmission would be much more efficient as the
transformers and capacitors could be made much smaller.
Regards,
Dennis O.
With all due respect, and purely out of regard for your personal
safety, I *STRONGLY* suggest that both you gentelmen immediately suspend
all involvement with these items until you gain a better understanding of
basic AC theory and practice!!
In the first place, the adverse physiological effects of voltage on the
human body is due mainly to currents above a certain threshold across the
chest cavity and heart structures, clamping and spasm of muscles
resulting in tearing of tissues, and nerve damage/eradication. Then
there are the burn phenomena, both resitive and RF induced.
These come into play at various points and severities, depending on the
amount of current dropped by the body, the path taken by the voltage, and
the frequencies (from DC to RF) as well as the voltage, and the duration
of the exposure.
Y'all *really* oughta read up on some basic electrical and RF safety -
I'm sacred for you. I've lost friends in electrical accidents and it's
not the prettiest way to depart the planet.
As for power transmission being more efficient at higher line freqs:
look up "skin effect" and see how that tallies with your theory. High
frequencies travel more and more on the the surface of a conductor -
which is how microwaves use 'waveguide' (very basically). Many times you
will see big HF coils wound with tubing - no use having all that copper
if it'll never see the currents.
Aircraft used to use 400 Htz to cut down on the iron/copper wieght -
but the most modern ships are all going to DC busses as the gear gets
smaller and more integrated.
Please do get a btter idea of these safety issues before you find out
the hard way.
Cheers
John KB6SCO
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|