Hi All
For the Pi or PiL adjustaiment whit the swr analyzer ,it's necessary to place
a non-inductive resistor egual to the plate impedance,from the anode tube and
the chassis ground.
I would like to know if in the PiL case ,for the best result, it's necessary
to place also the non-inductive resistor egual to RM value ,for example 300
ohm, from the load variable capacitor to the chassis ground.
Many thanks in advance
73 Luca ik5tsw@virgilio.it
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|