On Feb 24, 2005, at 12:23 AM, Japerlick@aol.com wrote:
> If you really want an instant on amp, you need to go solid state.
> In that case, you can start transmitting in probably 100-200
> milliseconds.
> I don't think the 1200 can warm up that fast.....
1500W-output thoriated tungsten filament tubes can be transmitted
through at the instant they are switched on. Full output is typically
reached in about a half-second.
>
> John
> K0UM
>
Richard L. Measures, AG6K, 805.386.3734. www.somis.org
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|