Re: [Amps] MLA-2500B Question

To:	amps@contesting.com
Subject:	Re: [Amps] MLA-2500B Question
From:	Bob Nielsen <nielsen@oz.net>
Date:	Tue, 29 Mar 2005 13:28:15 -0800
List-post:	<mailto:amps@contesting.com>

I don't know if it used much anymore, but recall that some of the early 
linear amp designs used a high-wattage 50 ohm resistor at the input.  
This meant that much more drive power was required, but it tended to 
present a much more stable impedance to the exciter.

73,
Bob, N7XY
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread]	Current Thread	[Next in Thread>
Re: [Amps] MLA-2500B Question, (continued) Re: [Amps] MLA-2500B Question, Tony King - W4ZT Re: [Amps] MLA-2500B Question, Will Matney Re: [Amps] MLA-2500B Question, Tony King - W4ZT Re: [Amps] MLA-2500B Question, daniel hearn Re: [Amps] MLA-2500B Question, Tony King - W4ZT Re: [Amps] MLA-2500B Question, Gary Schafer Re: [Amps] MLA-2500B Question, Will Matney Re: [Amps] MLA-2500B Question, Mark Hill Re: [Amps] MLA-2500B Question, Gary Schafer Re: [Amps] MLA-2500B Question, Roger D Johnson Re: [Amps] MLA-2500B Question, Bob Nielsen <= Re: [Amps] MLA-2500B Question, Roger Parsons Re: [Amps] MLA-2500B Question, Tony King - W4ZT Re: [Amps] MLA-2500B Question, Karl-Arne Markström Re: [Amps] MLA-2500B Question, Steve Thompson Re: [Amps] MLA-2500B Question, Roger Parsons Re: [Amps] MLA-2500B Question, Roger Parsons Re: [Amps] MLA-2500B Question, Bill Fuqua Re: [Amps] MLA-2500B Question, Adrian Rees (M1LCR) Re: [Amps] MLA-2500B Question, Roger Parsons Re: [Amps] MLA-2500B Question, Karl-Arne Markström

Previous by Date:	[Amps] 3cx3000a7, Joe Francalanza
Next by Date:	Re: [Amps] RMS VS Peak VS Average power and the Bird 43 wattmeter, Dennis12Amplify
Previous by Thread:	Re: [Amps] MLA-2500B Question, Roger D Johnson
Next by Thread:	Re: [Amps] MLA-2500B Question, Roger Parsons
Indexes:	[Date] [Thread] [Top] [All Lists]