Amps
[Top] [All Lists]

Re: [Amps] Grid Current Advice

To: "Steven Cook" <sccook1@cox.net>
Subject: Re: [Amps] Grid Current Advice
From: R.Measures <r@somis.org>
Date: Mon, 15 Aug 2005 20:33:37 -0700
List-post: <mailto:amps@contesting.com>
On Aug 15, 2005, at 8:10 PM, Steven Cook wrote:

> So if you are running AB2 at circa 3,000 volts on the plate, and let's 
> say... 5 volts of zener bias, and 230 ma of grid current -- would be a 
> little over 1 watt of grid dissipation.  (.230 X 5 = 1.15 watts).
>
> Did I do that right?

It's the AC grid to cathode potential, which is c. 80V-rms multiplied 
by 0.23A.
>
> Steve
>
>
>
> ----- Original Message ----- From: "R.Measures" <r@somis.org>
> To: <keith@dutson.net>
> Cc: "Amps" <amps@contesting.com>
> Sent: Monday, August 15, 2005 7:52 PM
> Subject: Re: [Amps] Grid Current Advice
>
>
> There is no max grid-I rating.  The max rated grid dissipation is 20w,
> but several experimenters have found this to be somewhat conservative
> -- probably because the grid is made from Mo, which melts at 2617ºC.
>
> Figuring grid P --- According to "Care and Feeding ... ... ..." ,
> grid-dissipation is approx. the indicated DC grid current multiplied by
> the RMS grid to cathode potential.
>
> cheers, Keith
> .
> On Aug 15, 2005, at 7:22 PM, Keith Dutson wrote:
>
>> What is the maximum recommended grid current for a pair of Eimac 
>> 3-500G
>> tubes?  Thanks.
>>
>> 73, Keith NM5G
>>
>> _______________________________________________
>> Amps mailing list
>> Amps@contesting.com
>> http://lists.contesting.com/mailman/listinfo/amps
>>
>>
>
> Richard L. Measures, AG6K, 805.386.3734.  www.somis.org
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
>

Richard L. Measures, AG6K, 805.386.3734.  www.somis.org

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>