Amps
[Top] [All Lists]

Re: [Amps] Project Boxes...

To: <amps@contesting.com>, "Dino Darling" <k6rix@earthlink.net>
Subject: Re: [Amps] Project Boxes...
From: "Ron Spencer" <n4vos@bellsouth.net>
Date: Mon, 12 Sep 2005 19:22:25 -0400
List-post: <mailto:amps@contesting.com>
Newark Electronics has metal chassis I got one for my 8877 project.

Ron Spencer
----- Original Message ----- 
From: "Dino Darling" <k6rix@earthlink.net>
To: <amps@contesting.com>
Sent: Monday, September 12, 2005 12:39 PM
Subject: [Amps] Project Boxes...


> Hello!
>
> I have two projects I'd like to tackle.  One will be a 6-meter mono band
> amp using a single GS-35B.  The other will be a 10-80 amp using a pair of
> GS-35Bs.  They will both be fed by the same power supply in one large rack
> cabinet.  I'm still in the "sketching it out" stage.
>
> I am looking for a source for the RF decks.  I want them to be rack
> mountable.  I've done a search on "rack mount enclosures", "rack mount
> boxes", "project boxes", etc.  I usually get pictures of the racks
> themselves rather than the boxes that go in them.  Any suggestions for
> enclosures (boxes)?
>
> I'm not in the position to role my own enclosures at this time.  Thanks!
>
> Dino...k6rix@earthlink.net
>
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps 

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>