Amps
[Top] [All Lists]

Re: [Amps] Is solid Cu 600VAC house wire, good for tank toroids?

To: "rob" <VE6TR@telus.net>, <Amps@contesting.com>
Subject: Re: [Amps] Is solid Cu 600VAC house wire, good for tank toroids?
From: "Gary Smith" <wa6fgi@sbcglobal.net>
Date: Fri, 6 Jan 2006 09:11:55 -0800
List-post: <mailto:amps@contesting.com>
That's the best "old adage" I've heard for a long long time!!
73,
Gary...wa6fgi

----- Original Message ----- 
From: "rob" <VE6TR@telus.net>
To: <Amps@contesting.com>
Sent: Thursday, January 05, 2006 5:17 PM
Subject: Re: [Amps] Is solid Cu 600VAC house wire, good for tank toroids?


> An old adage that often rings true:  "A cheap man pays twice".
>
> Rob VE6TR
>
>
>>Rich said:
>>>Sometimes cheaper turns out to be way more expensive.<
>>This is very true, but a lot of CEOs (and other managers, for that matter) 
>>can't  see it!
>>73
>>Peter G3RZP
>>_______________________________________________
>>Amps mailing list
>>Amps@contesting.com
>>http://lists.contesting.com/mailman/listinfo/amps
>
>
>
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
> 


_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>