Tim, you will find a set of measurements of baluns on our clubs web
site,www.sdxa.org The measurements of complex impedance were made by
WA2SRQ. Click DX Tips, then Baluns for discussion about the tests, then
Tables of Measurements for the numbers. He measured a typical ferrite bead
balun, several sizes of solenoid wound coax types and scramble wound coax
types. Measurements were made over the entire HF range with good equipment.
73, Dan, N5AR
-----Original Message-----
From: amps-bounces@contesting.com [mailto:amps-bounces@contesting.com]On
Behalf Of Tim O'Rourke
Sent: Monday, February 13, 2006 12:57 PM
To: amps@contesting.com
Subject: [Amps] HP Balun's
I am in process of replacing balun on my log yagi. Anyone done any testing
on 1.5 KW baluns and found one suitable for 7-30 mHz?
Tim W4YN
Tim O'Rourke
W4YN@ARRL.Net
Low Power Amature Radio Rocks
Member of Flying Pigs,ARCI,GQRP,RSGB,ARRL Life Member
NHRA Life Member
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
--
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.1.375 / Virus Database: 267.15.7/259 - Release Date: 2/13/2006
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|