The AM-8 was for 6 meters, wasn't it, Bill? I had a AM-495/GR. It was for 6
or 10m.I sold it long time ago. Always wanted another. I have seen an AM-494
for 2m. I found an AM-8/TRA-1 in IN last summer. I have the 73 Mag article
on modifying it to 6 or 2 meters.
Joe W4AAB
----- Original Message -----
From: "Bill Fuqua" <wlfuqu00@uky.edu>
To: "amPS" <amps@contesting.com>
Sent: Monday, February 20, 2006 8:59 AM
Subject: [Amps] AM-495
> I am looking for an AM-495 or the commercial version of it. I had one
> many years ago that I modified to run on 20 and 15 meters with my 20A SSB
> exciter. I don't need the power supply or the tubes. If you have one at a
> reasonable price please contact me. My conversion was simple. I connected
> the tubes in parallel (they were push pull) the paralleled the two
> capacitor sections and used the entire output coil with a loading
capacitor
> to form a Pi network.
> I also paralleled the input capacitors and used the entire input coil
> for a tuned input. Neutralization was not needed on HF. This worked well
> until I sold it.
> If interested, I have an AM-8 to trade that has been converted to 60
> meters.
>
> 73
> Bill wa4lav
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|