ORIGINAL MESSAGE:
At 08:34 AM 2/22/2006, HOWARDLYON@aol.com wrote:
>What is the ALC output? My IC746 accepts 0 to -4V. The circuit looks like
>it puts out much more than -4. Attenuator time?
>
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
All the experts - 99.99% - recommend NOT using ALC derived from the
amp to feed back to the TX. Tune the amp at maximum output and back
off the TX power just a hair. Amp-derived ALC never works exactly
like you want it to.
73, Bill W6WRT
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|