Try this link
http://www.cardwellcondenser.com/PAGES/jcsp15.html
looks like a 4500 Volt Capacitor
Edgar, N6OU
-----Original Message-----
From: amps-bounces@contesting.com [mailto:amps-bounces@contesting.com] On
Behalf Of Mike
Sent: Thursday, March 02, 2006 8:47 PM
To: amps@contesting.com
Subject: [Amps] Var. Cap. Identify
Hello,
Need info. on an E. F. Johnson, split stator variable capacitor. The
Johnson label is damaged and all the information that can be obtained
from it is: 0.125" spacing, Model No. 1X3-906 (the "X" looks like a 5
and the "9" is not that clear either).
The capacitance of the sections, as measured with an Autek Analyzer
at 3.5 MHz, is 70 -20 pF and 140 - 30 pF. The number of plates per
section is 8 rotor and 7 stator, and 4 rotor and 3 stator.
Need information on what voltage this capacitor can support and are
the measured capacitance values correct?
73,
Mike, K4GMH
__
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|