Amps
[Top] [All Lists]

Re: [Amps] small signal diodes

To: "'Dan Sawyer'" <dansawyer@earthlink.net>,"'amps'" <amps@contesting.com>
Subject: Re: [Amps] small signal diodes
From: "Gary Schafer" <garyschafer@comcast.net>
Reply-to: garyschafer@comcast.net
Date: Wed, 5 Apr 2006 11:21:20 -0400
List-post: <mailto:amps@contesting.com>
1N5711 if I remember right, are the ones some have used in the 8405 probes.

73
Gary  K4FMX

> -----Original Message-----
> From: amps-bounces@contesting.com [mailto:amps-bounces@contesting.com] On
> Behalf Of Dan Sawyer
> Sent: Wednesday, April 05, 2006 10:04 AM
> To: amps
> Subject: [Amps] small signal diodes
> 
> All,
> 
> I have been repairing an 8405a and have noticed something about the
> probe sampling diodes. The HP sampling diodes have a peculiar curve that
> other diodes do not seem to have. They have a very sharp 'knee' and a
> very steep rise. Other diodes do not have that sharp knee or near
> vertical rise. In looking for a replacement, what type of diodes would
> have this characteristic?
> 
> Thanks,
> 
> Dan
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps


_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>