I have been using copper flashing from Home Depot. They will cut just what
you need, like a 12"x12" piece. Then bring it home and make strips with tin
snips.
Mike, W1NR
----- Original Message -----
From: "Pete Smith" <n4zr@contesting.com>
To: <amps@contesting.com>
Sent: Wednesday, June 07, 2006 8:37 AM
Subject: [Amps] teeny copper strap
> Before I mail order some copper flashing or go to one of the lightning
> protection outfits for far more than I'll need, is there any non-radio
> source of appropriate stuff for grounding my SB-220 grids? I think that
> stained glass makers use copper foil strips, but assume that is probably
> too thin for what I need.
>
> 73, Pete N4ZR
> The World HF Contest Station Database
> Full details on 3165 contest stations
> at http://www.pvrc.org/WCSD/WCSDsearch.htm
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|