To: | <g3rzp@g3rzp.wanadoo.co.uk>, "'Hsu'" <Jbenson@sohu.co> |
---|---|
Subject: | Re: [Amps] Grid Vs cathode drive |
From: | "Joe Subich, W4TV" <w4tv@subich.com> |
Date: | Thu, 3 Aug 2006 08:25:54 -0400 |
List-post: | <mailto:amps@contesting.com> |
Peter writes: > The downside is that you need tuned circuits in the cathode > for decent linearity - I was always surprised at the 30L1 not > having those. I made that mistake a week or so ago and was corrected ... the 30L1 does have tuned input. See the schematic/manual available from: http://www.collinsradio.org/html/30l-1.html The tuned input is visible in the picture about half-way down the page. 73, ... Joe, W4TV _______________________________________________ Amps mailing list Amps@contesting.com http://lists.contesting.com/mailman/listinfo/amps |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | [Amps] SELL: Heath SB1000 Amplifier Components, w2cqm@juno.com |
---|---|
Next by Date: | Re: [Amps] G2DAF four 4CX250Bs G2DAF amplifier, Peter Chadwick |
Previous by Thread: | Re: [Amps] Grid Vs cathode drive, Hsu |
Next by Thread: | Re: [Amps] Grid Vs cathode drive, Will Matney |
Indexes: | [Date] [Thread] [Top] [All Lists] |