Hummmm. Not likely with the original 811A configuration but with 4 572B'B
and running about 2500VDC it will run 2KW INPUT and about 1200 output. 3KV
is pushing it a bunch. I would say your friend is either yanking your chain
a large chunk or his watt meter is EXTREAMLY generous or both.
Michael Baker K7DD
k7ddmjb@qwest.net
-----Original Message-----
From: amps-bounces@contesting.com [mailto:amps-bounces@contesting.com] On
Behalf Of tom and jeanne Bates
Sent: Friday, August 04, 2006 3:58 PM
To: amps@contesting.com
Subject: [Amps] Heathkit HA10 linear
Hello All
Is there anyone out there that is using a Heathkit HA 10 linear with a solid
state transceiver? I have one that has been upgraded to a 3000 volt
transformer and uses 2B28 rectifier tubes.It will cruise at 2000 plus watts
according to the previous owner although he used it with a Heathkit exciter
and a Drake 2B receiver and I want to use it with a Yeasu 990.
Help someone please!
Tom N4RGZ Clanton Alabama
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
--
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.1.394 / Virus Database: 268.10.5/407 - Release Date: 8/3/2006
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|