Amps
[Top] [All Lists]

Re: [Amps] Need Japan Radio Plate Transformer Info

To: "Robert B. Bonner" <rbonner@qro.com>, amps@contesting.com
Subject: Re: [Amps] Need Japan Radio Plate Transformer Info
From: "Will Matney" <craxd1@verizon.net>
Reply-to: craxd1@verizon.net
Date: Fri, 01 Sep 2006 21:24:52 -0400
List-post: <mailto:amps@contesting.com>

*********** REPLY SEPARATOR  ***********

On 9/1/06 at 11:46 AM Robert B. Bonner wrote:

>My God Phil,  if you are going to make a comment on this reflector make
>sure
>at least you spell your words correctly.  
>
>Supercalifragilisticexpialidocious
>
>Apparently my undergrad studies were in Mary Poppins.  By the time I did my
>PhD we were trying to figure out how the bitch flew.


During my time, I was trying to see if I could get her to flux!

>
>Bob DD
>
>-----Original Message-----
>From: amps-bounces@contesting.com [mailto:amps-bounces@contesting.com] On
>Behalf Of Phil Clements
>Sent: Friday, September 01, 2006 8:32 AM
>To: amps@contesting.com
>Subject: Re: [Amps] Need Japan Radio Plate Transformer Info
>
>
>
>> Tom said:
>> >You now have very close if not exactly the same flux
>> density. The transformer, other than having more voltage,
>> sees no difference at all.<
>
>< Peter Said:
>> Isn't this what they call serendipity?
>> Peter G3RZP
>
>It could even be bordering on supercalifragilisticexpealidoches!
>
>(((73)))
>Phil, K5PC
>
>
>


Best,

Will

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>