| To: | amps@contesting.com |
|---|---|
| Subject: | [Amps] Kilovac HC-2 Mounting Nut |
| From: | Mike <k4gmh@arrl.net> |
| Date: | Thu, 14 Sep 2006 23:25:09 -0400 |
| List-post: | <mailto:amps@contesting.com> |
Hello,
Need a couple of the mounting nuts for a pair of Kilovac HC-2. Tried
M14x1.5mm nuts, but none work on the HC-2. The threads on the
M14x1.5 nuts I could find were too coarse for the fine threads on the
relay. The spec sheet identifies the threads as M14x1.5-6g. Not
sure what the "-6g" means; something to do with "fine" thread?
73,
Mike, K4GMH
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | Re: [Amps] Bliss Motarized High-Power Tuner, Bob Maser |
|---|---|
| Next by Date: | Re: [Amps] Kilovac HC-2 Mounting Nut, Peter Chadwick |
| Previous by Thread: | [Amps] Bliss Motarized High-Power Tuner, Paul Christensen |
| Next by Thread: | Re: [Amps] Kilovac HC-2 Mounting Nut, Steve Thompson |
| Indexes: | [Date] [Thread] [Top] [All Lists] |