Amps
[Top] [All Lists]

Re: [Amps] Henry 3K trouble

To: amps@contesting.com
Subject: Re: [Amps] Henry 3K trouble
From: Ian White GM3SEK <gm3sek@ifwtech.co.uk>
Reply-to: Ian White GM3SEK <gm3sek@ifwtech.co.uk>
Date: Wed, 1 Nov 2006 16:55:57 +0000
List-post: <mailto:amps@contesting.com>
A.R.S. -  W5AMI wrote:
>Just took D105 and C105 out of the circuit and removed C105 off of
>D105.  D105 is shorted both ways, so I'm going to go ahead and replace
>it and C105 before I go any further.  Maybe this will be the simple
>solution.  I hope!
>

This diode is meant to handle the current surge, not be destroyed by it. 
Many older amps use "1-amp" diodes like the 1N4001-4007 series, which 
don't have a high enough surge current rating.

The replacement should be at least a "3-amp" diode like the 1N5400-5408, 
or better still one of the big fat 6A diodes like the GI750 or P600 
series.

Peak  inverse voltage doesn't matter in this application, so you could 
use any diode that has a high enough current rating.

You'll may well find that C106 is OK, as the diode sacrificed itself to 
protect it.


-- 
73 from Ian GM3SEK
http://www.ifwtech.co.uk/g3sek

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>