Amps
[Top] [All Lists]

Re: [Amps] Zener Bias Replacement

To: aborg <a_borg@yahoo.com>
Subject: Re: [Amps] Zener Bias Replacement
From: W2RU - Bud Hippisley <W2RU@frontiernet.net>
Date: Mon, 06 Nov 2006 18:11:12 +0000
List-post: <mailto:amps@contesting.com>
aborg wrote:

>I need to replace a zener bias diode. I have a ton of
>1N5408's. Any problems with using a string of 9 X .07v [sic]
>=6.3v diodes connecting the cathodes to the center tap
>replacing a 6.3v 50W zener ?
>  
>
If temperature coefficient of the 6.3 volts is important, you might not 
want to do that.

Bud, W2RU
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>