When installing new diodes don't forget to remove the diode equalizing
resistors on the boards.
73
Gary K4FMX
> -----Original Message-----
> From: amps-bounces@contesting.com [mailto:amps-bounces@contesting.com] On
> Behalf Of Jim Zellmer
> Sent: Tuesday, February 06, 2007 9:52 PM
> To: amps@contesting.com
> Subject: [Amps] Drake L4B
>
> I recently picked up a nice L4B with power supply, SN 1934. The tube
> marking was pretty faded, but are Eimac 3-500Zs, date code 7115. the
> amp and PS are real clean and look physically pretty good. I have
> removed the two filter cap/ diodes boards from the PS. I think the
> Sprauge caps are original. They all reformed nicely and are showing
> less that 1 ma current at 450 volts. I will likely change out the
> diodes for some 3A 1KV diodes and button things up. Are there any other
> caveats, or issues that I should be looking for before I put this thing
> on line. General comments on the L4B are welcomed. I will be using the
> amp with my Drake B line twins.
>
> 73
>
> Jim Zellmer
> KA0VSL
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|