Amps
[Top] [All Lists]

Re: [Amps] Nichrome wire for suppressors

To: Gary@doctorgary.net
Subject: Re: [Amps] Nichrome wire for suppressors
From: George <K4GVT@comcast.net>
Date: Wed, 11 Feb 2009 11:59:02 -0500
List-post: <amps@contesting.com">mailto:amps@contesting.com>
As much as I disagree with it's use for this application, a good source 
for all types of materials including nichrome wire is
http://www.mcmaster.com/#nickel-chromium-(nichrome)-wire/=k2lpg

73,
George



Gary Smith wrote:
> Anyone have a suggestion where I can find quick & easy find about a 
> foot of nichrome wire to be used in parasitic suppressors. I thought 
> about possibly using the wire in a junk toaster but on close 
> examination I suspect it's too thin. Perhaps there's some other cheap 
> & easy access to it?
>
> Thanks,
>
> Gary
> KA1J
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
>
>   

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>