[Amps] tank calculations - MFJ analizer - resistor

["Chuck Partain" <CPartain@telecast-fiber.com>]

ok, quick question...(it'll be a poll)
 
DO I leave the tube connected to the tank circuit and put on a 1/2w
resistor or disconnect the tube from the tank to do
the sweeps for tuning calculations
 
some say leave the tube in.
 
 
I get quite a bit of difference with the tube in. I put 1500ohms to
ground of course amp is OFF, and sweep thru to find the best
position for my tank taps on each band.
 
 
thoughts!!!???
 
 
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps