[Amps] grounded grid 813 x4

[jonathan white <jonathan.white20@btinternet.com>]

Hi.
This has probable been asked before on this group,but... Is it good
practice to physically tie the grids to ground via one connection,or via
low value resistors and decoupling capacitors. I was going to go for VHF
practice and go for direct grounding,but would like some comments before
progressing this project.
               73`s Jon 

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps