Amps
[Top] [All Lists]

Re: [Amps] Plate Bypass Capacitor

To: <dezrat1242@yahoo.com>, <amps@contesting.com>
Subject: Re: [Amps] Plate Bypass Capacitor
From: "Carl" <km1h@jeremy.mv.com>
Date: Fri, 7 Aug 2009 08:40:20 -0400
List-post: <amps@contesting.com">mailto:amps@contesting.com>
Thats 2 in one day, you must be getting old!

Carl
KM1H


----- Original Message ----- 
From: "Bill, W6WRT" <dezrat1242@yahoo.com>
To: <amps@contesting.com>
Sent: Thursday, August 06, 2009 10:53 PM
Subject: Re: [Amps] Plate Bypass Capacitor


> ORIGINAL MESSAGE:
>
> On Thu, 6 Aug 2009 18:49:19 -0400, "Carl" <km1h@jeremy.mv.com> wrote:
>
>>400VDC MAX  on a 6146? I havent been paying attention to the thread but
>>thats a 750VDC tube for CW and SSB service.
>
> REPLY:
>
> It is indeed 400 VDC but only for a triode-connected audio amp. For normal 
> RF
> service, 750 VDC is ok for ICAS. Sorry for the confusation.
>
> 73, Bill W6WRT
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps 

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>