> Subject: [Amps] filament voltage
>
>
>
> Hi Guys,
>
>
>
> I want to quickly double check my understanding of filament voltage.
>
>
>
> When the datasheet specifies 13.5 +- 0.6 V, such as with the 3cx800A7, are
> they referring to a DC voltage? So, if I have 13.5 VAC, the RMS value,
> it would be just dandy, or are they referring that 13.5 V is the maximum
> peak value?
>
>
>
> thanks,
> Paul (KG7HF)
The reference is A.C. volts RMS measured at the tube pins.
(((73)))
Phil, k5PC
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|