I have recently aquired a TL-922. It is on a stiff 240V line which actually
measures 245V. No load voltage on CW is 2200 and on SSB is 3100. Under
full load the CW drops to 1900V @ 600ma and the SSB drops to 2400V @ 800ma.
Is there really suppose to be this much drop? It has the original 200uf
caps in it and I was thinking about replacing them with 560uf units. Also
the grid bias on CW is 60ma and on SSB 120ma which seems a little low.
thanks
Tom - AB3FL
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|