Its all of a KW out Peter. I use the modulator iron as a driver transformer
(-;
Carl
KM1H
Big amplifier project?
Is that not a two times 4-400 amp?
73
Peter
-----Original Message-----
From: amps-bounces@contesting.com [mailto:amps-bounces@contesting.com] On
Behalf Of Bob Sullivan
Sent: Freitag, 21. Mai 2010 01:53
To: amps@contesting.com
Subject: [Amps] High Power Parts
Listmates,
I have a couple of RCA BTA-1R1 BC transmitters that are left over from a
restoration job. There are lots of parts remaining. Anyone that is close to
Great Falls, VA is welcome to visit and see what might be of interest.
Prices will be cheap! Meters, transformers, large coils and capacitors,
terminal strips, diode boards, relays, etc etc .... including a VERY large
HV transformer!
Sorry, but I don't have the time to remove components and ship. I'll try to
answer questions.
I also have a few additional large chokes, transformers, etc., that might be
of interest.
This might be a good way to pick up some parts for that big amplifier
project. Hi.
Here's the completed job:
http://www.isquare.com/personal_pages/bta.htm
73, Bob
WØYVA
http://www.isquare.com/personal_pages/ras-hardware.htm
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|