Amps
[Top] [All Lists]

Re: [Amps] HV Connectors

To: amps@contesting.com
Subject: Re: [Amps] HV Connectors
From: Ian White GM3SEK <gm3sek@ifwtech.co.uk>
Reply-to: Ian White GM3SEK <gm3sek@ifwtech.co.uk>
Date: Mon, 24 May 2010 07:48:46 +0100
List-post: <amps@contesting.com">mailto:amps@contesting.com>
James Colville wrote:


>On Sun, May 23, 2010 at 12:31 PM, Barrie Smith <barrie@centric.net> 
>wrote:
>>a connector that was similar to a BNC where the ground had to
>> be made before the HV was connected.
>>


>I use Kings, SHV. You can see them in use in the pictures of my 8877 
>amplifier and power supply at:


Yes, SHV - expensive for connectors, but cheap for life insurance.

(Kings are one of several manufacturers. Mainline distributors such as 
Digi-Key and Mouser stock them at silly prices, but they often turn up 
surplus on eBay.)



-- 

73 from Ian GM3SEK
http://www.ifwtech.co.uk/g3sek
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>