The 2 meters are identical internally, any difference in readings is a
tolerance issue. Same with the SB-220/221 of which there were 4 different
vendors.
Carl
KM1H
----- Original Message -----
From: "James Colville" <jimw7ry@gmail.com>
To: "TL_Netvision" <ernie@netvision.net.il>
Cc: <amps@contesting.com>
Sent: Monday, May 24, 2010 7:22 PM
Subject: Re: [Amps] SB220 SB221 Multimeter OPEN
> Sb-220 and hl-2200 meters are NOT the same
>
> Jim w7ry
>
> On May 24, 2010 10:05 AM, "TL_Netvision" <ernie@netvision.net.il> wrote:
>
> Hi
>
> " What is the meter's DC resistance? "
>
>>From an HL2200 (SB220's younger cousin):
> 1170 ohm for the multimeter (meter P/N "830624").
> 1195 ohm for the IP meter (P/N "830625").
> Both measured directly, out of the circuit with a Fluke 115C.
> 73
> Isaac, 4Z4TL
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|