Thats what i figured - but she is still stuck true. (wonder if that's a sign of
over heating??) I removed the large nut, spring washer and the washer
underneath - still stubborn. The washer removed was slightly larger than the
spring washer - is there another that over 1.5Inch diameter ??
Any one have some step by step pics's that are of good resolution ??
Mike
KC7NOA
>
> To: patriot121@msn.com
> Subject: RE: [Amps] GS-35b
> Date: Wed, 8 Sep 2010 23:18:00 +0200
>
> Mike,
> Just release the screw inside the spreader, I use a coin or very big
> screwdriver.
> Then just push and turn a bit and it schould release.
> Best regards,
> Jan ON6ZG.
>
> -----Oorspronkelijk bericht-----
> Van: amps-bounces@contesting.com [mailto:amps-bounces@contesting.com] Namens
> MIKE DURKIN
> Verzonden: woensdag 8 september 2010 23:07
> Aan: amps fourm
> Onderwerp: [Amps] GS-35b
>
>
> Any one know how to remove the heat spreader from the triode (gs35b) ??
>
> Mike
> KC7NOA
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|