http://shop.ebay.com/nepeke25/m.html?_nkw=&_armrs=1&_from=&_ipg=&_trksid=p43
40
They are good, but they're for the GI7b and 3cx3000, but not the GS35b...
>-I am planning 3650V on the anode. This is significantly higher than
>the "official" data sheets state, however I notice that the official
>data sheets rate the tube for military service with less cooling. Does
>3650V look like an OK voltage?
Should be... I run 5KV, perhaps a little high, but it has worked fine since
power up.
73,
Andy
http://gd0tep.com
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|