Jim Thomson wrote:
> ## OK, here's the kicker. I worked out the maths, 16 ways to Sunday...and
> at the most, there should only
> be a .2 v drop on the 50A 3x3 fil choke. I used TWO lab calibrated
> fluke 87's... one on the input to the
> fil choke, and one at the socket. I consistently measure .4 v drop. All
> connections are rock solid. I checked
> the individual V drop across each connection too, and there is none. Go
> figure.
Did you take into account the choke's induction at 60 Hz?
I think the drop from the same amount of wire not wound into a coil
would be interesting.
--
Ron KA4INM - I'm proud to be Chuck's pop!
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|