Jim,
It sounds right, but my tester is needle meter. There are many mauufacturer
who built this product, but a mauufacturer in Nanking is the best.
I found the same product in ebay is expensive , in China.It only $350 orso.
73!Hsu
----- Original Message -----
From: "Jim Barber" <audioguy@charter.net>
To: "Hsu" <hsu4qro@gmail.com>
Cc: <amps@contesting.com>
Sent: Wednesday, September 29, 2010 6:22 AM
Subject: Re: [Amps] Chinese hipot RK2671A?
> Hi Hsu,
>
> There's no way to tell what transformer is being used, but if I'm
> reading it right the digital leakage current meter will read (for DC)
> 0-2ma or 0-10ma, two different scales . Does that sound right?
>
> I'll send the seller a note asking about the transformer and the metering.
>
> Thanks,
> Jim, N7CXI
>
> On 9/28/2010 2:58 PM, Hsu wrote:
>> I'm using a needle meter version of this hi-pot tester.
>> if is made in China. please attenttion the main transformer,
>> some inpensive version only use a micro wave oven transformer,but elegant
>> version should a C-Core high volt transformer.
>> This hi-pot tester have current limter and current meter,
>> but the minimum current maybe 10mA, it is too big for test tube.I add a 100uA
>> meter.
>> 73!Hsu
>>
>> ----- Original Message -----
>> From: "Carl"<km1h@jeremy.mv.com>
>> To:<audioguy@charter.net>; "AMPS"<amps@contesting.com>
>> Sent: Wednesday, September 29, 2010 5:16 AM
>> Subject: Re: [Amps] Chinese hipot RK2671A?
>>
>>
>>> Im using a similar Jap version I found at the local surplus place for $65.
>>>
>>> Earlier I built one that would get up to 15KV using a neon sign transformer
>>> but the Jap one is more convenient within its ratings.
>>>
>>> Carl
>>> KM1H
>>>
>>>
>>> ----- Original Message -----
>>> From: "Jim Barber"<audioguy@charter.net>
>>> To: "AMPS"<amps@contesting.com>
>>> Sent: Tuesday, September 28, 2010 3:34 PM
>>> Subject: [Amps] Chinese hipot RK2671A?
>>>
>>>
>>>> Anyone have any experience (good or bad) with the RK2671A DC/AC Hipot
>>>> tester, probably from Shenzen Meiruike Electronics?
>>>>
>>>> http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&Item=390104450926&Category=4678&_trkparms=algo%3DLVI%26its%3DI%26otn%3D2
>>>>
>>>> Failing that, any recommendations for a good brand/model to look for in
>>>> the used market?
>>>>
>>>> Thanks,
>>>> Jim, N7CXI
>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> Amps mailing list
>>>> Amps@contesting.com
>>>> http://lists.contesting.com/mailman/listinfo/amps
>>>
>>> _______________________________________________
>>> Amps mailing list
>>> Amps@contesting.com
>>> http://lists.contesting.com/mailman/listinfo/amps
>> _______________________________________________
>> Amps mailing list
>> Amps@contesting.com
>> http://lists.contesting.com/mailman/listinfo/amps
>>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|