tu all, easy way out is to get a couple of 30ua after market meters at
35 us each es put the 100ua back in the draw fer another day hi
Quoting Steve <g8gsq72@gmail.com>:
> I don't think you can hurt the slug by winding up the power until it
> gives 100uA, so DIY testing against another meter is ok.
>
> If you prise off the sticky label there's a trimpot accessible through a
> hole in the top piece. If it's not quite aligned to get a trimtool at it
> the top comes off easily. I have no idea What range of adjustment that
> will give you, or what it does to the 'law' on the scale.
>
> On a 100B element here the trimmer is 25k. I was able to adjust it to
> read 250W FSD on a regular 43 thruline. I don't recall how the scale
> accuracy fared at lower power, I wasn't interested.
>
> Steve
>
>> I have a couple of BIRD 100ua meters 2150-090 es 091
>> if I use these on my thruline 4522-002-8 50 ohm with 43 slugs wot
>> error will I see?? as these slugs are for 30ua..meters!!
>> or can I recal the slugs es if so "how"
>> tu 73 vk3pa
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|