Not the SB-200 or SB-201, those amplifiers use 572B tubes. The SB-220 and
SB-221 use 3-500Z tubes.
Methinks your typing fingers got out of sync with the brain! :>)
Glen, K9STH
Website: http://k9sth.com
________________________________
From: Rick Stealey <rstealey@hotmail.com>
To: amps@contesting.com
Sent: Sunday, November 6, 2011 6:22 AM
Subject: Re: [Amps] Gettering 3-500 Tubes
> Go ahead and try them as they are after you've gotten the rest sorted out.
But what if they arc over? Isn't that going to do some serious damage to the
SB200?
If you don't getter them, how about at LEAST put a resistor in series with the
B+ to limit the current.
A bad tube will still arc (snap) won't it?
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|