Amps
[Top] [All Lists]

Re: [Amps] Source for plate xfrmer

To: "B Osburn" <plantrunner5@msn.com>, <amps@contesting.com>
Subject: Re: [Amps] Source for plate xfrmer
From: "Carl" <km1h@jeremy.mv.com>
Date: Mon, 13 Feb 2012 22:13:12 -0500
List-post: <amps@contesting.com">mailto:amps@contesting.com>
Are those suitable for ham amp use or do they have old style high impedance 
(and DC resistance) windings that are not that suitable for a big C only filter?
IE: Pole Pigs

Carl
KM1H



  ----- Original Message ----- 
  From: B Osburn 
  To: Al Kozakiewicz ; Steve Bookout ; amps@contesting.com ; Carl 
  Sent: Monday, February 13, 2012 9:52 PM
  Subject: Re: [Amps] Source for plate xfrmer


  I don't think this is what you are looking for but Monster Controls has used 
control power XFMRs.  I paid $950 for a 5kVA 240/2400V + Shipping. They only 
come in common medium voltage (MV) switchgear voltages 2400, 4160, 6900V.  
Sizes range from 0.75kVA to 5kVA. 
  Brad AB0YD

  http://www.monster4controls.com/parts/cat/control%20power%20transformer/


    ----- Original Message ----- 
    From: Carl 
    To: Al Kozakiewicz ; Steve Bookout ; amps@contesting.com 
    Sent: Monday, February 13, 2012 4:55 PM
    Subject: Re: [Amps] Source for plate xfrmer


    And you pay thru the nose. Id check with Heyboer Transformer if you Dont 
    have to have a C-Core.

    Carl
    KM1H


    ----- Original Message ----- 
    From: "Al Kozakiewicz" <akozak@hourglass.com>
    To: "Steve Bookout" <steve@dx4win.com>; <amps@contesting.com>
    Sent: Monday, February 13, 2012 1:38 PM
    Subject: Re: [Amps] Source for plate xfrmer


    > Unless something changed, Harbach Electronics now makes/sells the Dahl 
    > transformers.
    >
    > Al
    > AB2ZY
    >
    > ________________________________________
    > From: amps-bounces@contesting.com [amps-bounces@contesting.com] On Behalf 
    > Of Steve Bookout [steve@dx4win.com]
    > Sent: Monday, February 13, 2012 1:35 PM
    > To: amps@contesting.com
    > Subject: [Amps] Source for plate xfrmer
    >
    > Hello all,
    >
    > Where do you look for a new HV plate transformer these days?
    >
    > I understand Peter Dahl is no longer around.
    >
    > I'm looking for 3000 VAC secondary @ 1+ amp CCS.
    >
    > TIA
    >
    > 73 de Steve, NR4M
    >
    > _______________________________________________
    > Amps mailing list
    > Amps@contesting.com
    > http://lists.contesting.com/mailman/listinfo/amps
    > _______________________________________________
    > Amps mailing list
    > Amps@contesting.com
    > http://lists.contesting.com/mailman/listinfo/amps
    >
    >
    > -----
    > No virus found in this message.
    > Checked by AVG - www.avg.com
    > Version: 10.0.1424 / Virus Database: 2112/4807 - Release Date: 02/13/12
    > 

    _______________________________________________
    Amps mailing list
    Amps@contesting.com
    http://lists.contesting.com/mailman/listinfo/amps


------------------------------------------------------------------------------

  No virus found in this message.
  Checked by AVG - www.avg.com
  Version: 10.0.1424 / Virus Database: 2112/4808 - Release Date: 02/13/12
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>