-----Original Message-----
From: amps-bounces@contesting.com [mailto:amps-bounces@contesting.com] On
Behalf Of Roger (K8RI)
Sent: Tuesday, March 13, 2012 9:03 PM
To: amps@contesting.com
Subject: Re: [Amps] Transfer Lettering
>I've never found transfer lettering to be satisfactory and I used a lot of
>them when working in process control Instrumentation.
>At least they never lived up to my expectations. They were "OK" but never
>gave that "professional look".
I agree.
For small projects I've been printing full color with a black background on
regular paper with a really good laser printer I have access to. Laminate the
paper, trim and glue it to the panel. It really looks professional for
something that costs me next to nothing.
You could get started with silk screening for $100-$200. That's probably too
much for a single project, but if you plan to do a lot of PC boards (or T
shirts) you could get a lot of use out of a modest setup.
Al
AB2ZY
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|